Connection Assignments Of Slolt I (3-Terminal) Input For Low-Level Advance Warning And Empty Report - ECOLAB EMP KKS E60 Bedienungsanleitung

NOTICE!
Since the protective caps or connector plugs are coded, the respective images
must be observed (I-III). Do not use force when inserting them.
WARNING!
To protect the electronics against contact with chemicals or humidity, never
operate the metering pump without protective caps or connector cables, since
the connectors can become oxidized.
Mixing up the protective caps may result in malfunctions of the pump and/or
damage to the connectors!
7.2.2 Connection assignments of Slolt I (3-terminal) Input for low-level advance warning
and empty report
Slot I (3-terminal)
(plug assignments see
PIN Conductor coloring
1 brown
3 blue
4 black
Ä Chapter 14.5.1 'Connector I' on page 124).
37
Device installation
Assignment
Input low-level warning
Input empty report
GND (┴)
417101442 Rev. 12-02.2019