Operation Mode / Pulse - ECOLAB EMP KKS E60 Bedienungsanleitung

10.2.3

Operation mode / pulse

For the "pulse" operation mode, the metering pump only works in conjunction with
incoming pulses (e.g. from a contact water meter).
The following pulse processing options can be selected:
Multiplication
Incoming pulses are multiplied by a configurable factor (n):
1 pulse = n pump strokes (default setting)
Division
Incoming pulses are divided by a configurable factor (n):
n Impulse = 1 Pumpenhub
10.2.3.1 Selecting
Fig. 41: Operating mode /pulse: Selecting
67
Menu description
417101442 Rev. 12-02.2019