Functional Description / Setup; Functional Description; Setup; Setup Of Degassing Valve - ECOLAB ELADOS EMP II E60 Betriebsanleitung

4.

Functional Description / Setup

4.1

Functional Description

PLUS
The DEGAS
(see Operating Instruction, Article No. 417101438) ensures an automatic degassing when
metering aerogenic mediums.
The degassing valve (DGV) can be mounted directly on the pressure valve of the metering
pump (see chapter
the metering pump.
If the degassing valve is opening while the metering pump is running, the medium riddled
with gas bubbles is routed through the return pipe (see chapter
into the container (see chapter
again.
The times indicating when and for how long the degassing valve is opened can be selected
as desired with the menu of the pump. If the degassing valve is closed, the pump delivers to
the metering pipe (see fig. 4.1, pos. 1).
4.2

Setup

The degassing control consists of the DEGAS
with mains plug.
Make sure the two plugs are installed with the respective seals and that the plugs are
ACHTUNG
always screwed together!
4.2.1

Setup of Degassing Valve

417101377_DegasPlus
system together with the metering pumps of the type series EMP II E60
4.2 "Setup", fig. 4.1, pos. 2) and is controlled by the software integrated in
4.2 "Setup", fig. 4.1, pos. 9) until the degassing valve closes
Pos.
1
2
3
4
5
6
fig. 4.2
PLUS
degassing valve and the DEGAS
Pos. Description
1
Metering pipe to consumer
2
Pressure valve degassing valve
3
Connector plug DEGAS
4
Power supply
5 Connection cable to pump
6
Connector plug pump (Pos. 5)
7 Suction valve pump
8
Suction pipe
9
Metering medium container
10
Pump head
11
Pressure valve pump
12 Return pipe from degassing valve
fig. 4.1
Description
Connection of metering pipe
Degassing valve
Connection of return pipe
Connection of metering pump
Solenoid valve
Electrical contacts for connector plug of degassing valve
(see also chapter 5, "Installation, "fig. 5.1, pos. 5)
4.2 "Setup", fig. 4.1, pos. 12)
PLUS
PLUS
cable
Rev. 4-12.14
cable