Menu description
10.3.5.1 Selecting
Fig. 49: Configuration Code Selecting
- Code query inactive.
(Default setting).
3 Code query active.
Ä Chapter 10.3.5.2 'Setting' on page 74.
10.3.5.2 Setting
Fig. 50: Configuration Code Setting
10.3.6
Configuration / Autostart
This function determines whether the pump is set to "OFF" ("Standby" in V 4.0) when the
mains connection is re-established following a power cut or if the pump should
immediately recommence functioning in the configured operation mode.
417101442 Rev. 12-02.2019
74