Pump Key Definition E60 - ECOLAB EMP KKS E60 Bedienungsanleitung

14.1.3

Pump key definition E60

n Electrical version
n E 60
n On/Off switch for switching the pump
n mechanical stroke adjustment
n backlit graphical display, 4 control keys
n individual stroke control (each stroke is executed completely)
n metering control via stroke signal output (computed) or via external metering
monitoring system
n collection of operating and consumption data (computed)
n calibration function
n configurable operation modes:
n Internal operation
n Setting of metering quantity/metering frequency in:
n Strokes/min.
Percentage
n
n Litres/hr (or gallons/hr)
n External operation
n Pulse operation (control via pulses)
-- Pulse multiplication (1 incoming pulse = n metering strokes)
-- Pulse division (n incoming pulses = 1 metering stroke)
Standard signal operation (control via external standard signal 0/4 - 20 mA or 20 - 0/4
n
mA)
n Batch operation (a preset quantity is metered after being triggered by external enable
pulse)
n Inputs:
n low-level monitoring of bundle holder (reserve and empty report)
n pulse
n standard signal
enabling signal (metering lock)
n
n metering monitoring
Outputs:
n
n low-level monitoring of bundle holder / fault (reserve and empty report)
n Fault report
n stroke signal
PLUS
n E 60
n similar to E 60, but with the addition of a dongle box for connecting of oval gear meter
OGM PLUS
n display of the currently measured metering quantity and automatic readjustment of
pump output (only in conjunction with an external through flow monitoring system, e.g.
oval gear meter OGM
n automatic calibration function via oval gear meter
consumption data monitoring via oval gear meter
n
(expansion unit for the capture of operating data)
PLUS )
Technical Specifications
121 417101442 Rev. 12-02.2019