Calibration; Overview; Calibration Pump - ECOLAB EMP KKS E60 Bedienungsanleitung

10.3.16.3 Degas / Degas break
The time between two degassing intervals is set under "degas break".
If a metering request is submitted during this period, this is processed and the Degas
break time is reset and restarted.
Default setting = 00:00
Setting range:
Fig. 76: Configuration Degas
10.4

Calibration

10.4.1

Overview

The procedure and display during the calibration process differ depending on whether or
not an oval gear meter (OGM) is connected.
Fig. 77: Calibration Overview

Calibration pump:

Ä Chapter 10.4.2 'Calibration / Pump' on page 100.
Calibration pump with OGM:
Ä Chapter 10.4.3 'Calibration pump with oval gear meter (OGM
hours 00 bis 23
minutes 00 bis 59
total 00:01 bis 23:59 h
PLUS Degas break
99
Menu description
PLUS
PLUS )' on page 101.
417101442 Rev. 12-02.2019