Connector Assignments Of Slot I (3-Pin, E11 And E20) Input For Low-Level Advance Warning And Empty Report; Installing The Suction Pipe With Low-Level Advance Warning And Empty Report (E11 And E20) - ECOLAB ELADOS EMP KKS Serie Bedienungsanleitung

7.2.3 Connector assignments of Slot I (3-pin, E11 and E20)
input for low-level advance warning and empty report
7.2.3.1 Installing the suction pipe with low-level advance warning and empty report
(E11 and E20)
When using a suction pipe, remove the dummy connector and mount the suction pipe
connector.
NOTE
Fig. 7.19
417101338_EMPKKS.doc
Fig. 7.8
1: Low-level advance warning
3: Empty report input
4: GND ( ┴ )
(plug assignments: see also chapter 12.5.1)
Slot I must always be assigned, either through the mounted strapping plug (protective cap
with corresponding symbol; see chapter 7.2.2) or through connection to the empty report
device.
50 Rev: 08-01.10