Configuration / Oval Gear Meter - ECOLAB EMP KKS E60 Bedienungsanleitung

Menu description
10.3.11 Configuration / Oval gear meter (only E60
The oval gear meter function makes it possible to record a "real" value in the operating
data/litre menu item
Ä Chapter 10.5.3 'Operating data / Litre' on page 106). Furthermore, this menu item
(
must be enabled to use the metering controller function (
10.3.12 'Configuration / Metering controller (only E60
( Ä Chapter 10.3.2 '"Scrolling the display"' on page 72).
The oval gear meter function is activated if the pump is extended to include a dongle box
(item no. 248606, EBS no. 10016094) to the E60
see accessories) has been connected.
If the dongle box and activation takes place by switching the pump off and then on again,
+
"E60 " appears on the bottom left of the pump's display unit.
PLUS
If an OGM
software by switching the pump on and off, "E60
gear meter function is automatically enabled in the Pump menu under Configuration, and
the metering controller function can be selected now.
If the pump software recognises that there is a dongle box or an OGM
the communication is then interrupted between the pump and the peripheral unit (through
the removal of the unit, for example), an error message is displayed
Ä Chapter 12.2 'Alarm messages (display)' on page 113).
(
To prevent this error message appearing repeatedly, the communication (connection)
must be restored, or the analysis must be disabled in the pump software
( Ä Chapter 12.2.1 'Disabling dongle box, OGM
on page 114).
10.3.11.1 Selecting
Fig. 56: Configuration / oval gear meter: Selecting
- oval gear meter is inactive.
(Default setting)
3 oval gear meter is active.
417101442 Rev. 12-02.2019
is connected to slot V on the dongle box and this has been activated in the
PLUS & OGM PLUS )
Ä Chapter
PLUS & OGM
PLUS
, and an OGM
++
" appears in the pump display, the oval
PLUS , MicroFlow
80
PLUS )' on page 81) and
PLUS
(oval gear meter,
PLUS connected, and
PLUS in the pump software '