ECOLAB EMP KKS E60 Bedienungsanleitung Seite 225

10.3.14.2 MicroFlow
PLUS
Fig. 65: Configuration / MicroFlow
The "stop pump" function is used to set whether or not the pump stops if a "metering
monitoring alarm" is triggered.
- Pump is not stopped in the event of an „Alarm metering monitor function"
(Default setting)
3Pump is stopped in the event of an „Alarm metering monitor function"
10.3.14.3 MicroFlow
PLUS
Fig. 66: Configuration / MicroFlow
The "Strokes" option is used to specify the interval of strokes to be monitored.
Setting range: 0-100
Default setting = 40 strokes
/ Stop pump
PLUS - Stop pump
/ Strokes
PLUS - Strokes
89
Menu description
417101442 Rev. 12-02.2019