Elcometer 307 Gebrauchsanleitung Seite 28

15 SPARES & ACCESSORIES (continued)
15.3 CALIBRATION STANDARDS
Available as a set or individually, allowing
users to select the most appropriate
thicknesses for their application, Elcometer
calibration standards are manufactured
from 4340 steel to a tolerance of ±0.1% of
the nominal thickness.
Calibration standard sets and individual
standards are supplied complete with
calibration certificate.
Description
Calibration Standard Set;
Nominal Thickness: 2 - 30mm (0.08 - 1.18")
Comprising of nominal thicknesses; 2, 5, 10, 15, 20, 25 & 30mm
(0.08, 0.20, 0.39, 0.59, 0.79, 0.98 & 1.18") , complete with holder
and calibration certificate.
Calibration Standard Holder
for thicknesses up to 100mm (3.94")
Note: Elcometer recommends that Calibration Standards are wrapped in anti-corrosion
film when not in use.
INDIVIDUAL CALIBRATION STANDARDS
Part Number
T920CALSTD-2
T920CALSTD-5
T920CALSTD-10
f
Calibration standards manufactured in other materials are available on request. Contact Elcometer for
further information.
g
Imperial values for information purposes only. Calibration standards are manufactured and measured in
millimetres.
en-27
R
f
g
Nominal
Thickness
mm inch
2 0.08
5 0.20
10 0.39
Sales Part Number
T920CALSTD-SET1
g
g
T920CALSTD-HLD
Part Number
g
T920CALSTD-15
T920CALSTD-20
T920CALSTD-25
Nominal
Thickness
mm inch
15 0.59
20 0.79
25 0.98
www.elcometer.com
g