Upgrading Your Gauge; Spares & Accessories - Elcometer 307 Gebrauchsanleitung

13 DOWNLOADING DATA (continued)

14 UPGRADING YOUR GAUGE

Gauge firmware can be upgraded to the latest version by the user via
®
ElcoMaster , as it becomes available. ElcoMaster will inform the user
of any updates when the gauge is connected to the PC with an internet
connection.
15 SPARES & ACCESSORIES
15.1 TRANSDUCERS
The transducers listed in Table 4 on page en-26 are compatible with
the Elcometer 307.
They are microdot - the transducer cable is not permanently fixed to
the transducer head and can be replaced - right angle, single element
delay line, 'intelligent' transducers. When connected, the transducer
frequency and diameter will be identified automatically by the gauge
and the user will be prompted to select the type of delay line attached
(if any).
Details of the transducer connected can be viewed at any time via
Menu/About/Transducer Information.
en-25
R
Compatible with smart phones
and tablets running Android 2.1
or above. To install, download
via www.elcometer.com or using
the Google Play™ Store app,
and follow the on screen
instructions.
Made for iPhone 6 Plus, iPhone
6, iPhone 5s, iPhone 5c, iPhone
5, iPhone 4s, iPhone 4, iPad Air
2, iPad mini 3, iPad Air, iPad mini
2, iPad (3rd and 4th generation),
iPad mini, iPad 2, and iPod touch
(4th and 5th generation). To
install, download via
www.elcometer.com or the App
Store, and follow the on screen
instructions.
®
www.elcometer.com