Applying Some Additional Baking Time - Gastroback Design Brotbackautomat Plus Bedienungsanleitung

Hot air and condensate could escape at the ventilation slits in the lid. Do not hold
your hands, arms or face directly over the appliance during operation.
9. When the baking process has been completed, acoustic signals are issued and
the LCD screen shows 0:00. The appliance automatically switches to the war-
ming function for 60 minutes at the maximum. (See: ›Warming Function‹) There-
after, the appliance switches OFF completely and the interior cools down.
WarnInG – HIGH TEMPERATURE: RISK OF BURNS!
The heating compartment and all parts within (e.g. bread pan) will get very hot duri-
ng operation. Protect your hands with oven gloves when attempting to take out the
bread pan while the appliance is still hot.
10. You can terminate the backing program and warming function at any time by
keeping the START/STOP button pressed until an acoustic signal sounds.
tip:
You should avoid leaving the bread in the bread pan after the appliance has been
switched OFF. When the appliance cools down, the bread could become moist
due to condensate.
11. Check the consistency of the bread. If the bread is not done or too light, you
can use the BAKE program to bake the bread for some additional minutes. (See:
›Applying Some Additional Baking Time‹)
12. Take the bread out of the Bread Maker as described in section Taking Out the
Bread.
aPPlYInG aDDItIonal BaKInG tIme
If the bread has not reached the desired consistency or you have unintentionally ter-
minated the baking program prematurely, you can apply some additional baking of
up to 1 hour. For this, leave the bread in the Bread Maker and close the lid.
note:
Before making any new entries, you must terminate the warming function or any
running program. For this keep the START/STOP button pressed for approx. 2
seconds until a signal sounds.
1. Press the MENU button to select the BAKE program (number 12). The pre-set
baking time (10 minutes) flashes on the LCD screen.
2. Using the buttons TIME+ and/or TIME– select the desired baking time. You can
select baking times from 10 minutes to 1 hour in steps of 1 minute.
3. Press the START/STOP button to start the program.
63