Gastroback Design Brotbackautomat Plus Bedienungsanleitung Seite 62

6. Thereafter you can set the finishing time of your program via the timer function.
You can enter a maximum delay of up to 13 hours. (See: ›Using the Timer‹)
ImPortant: If the display shows unusual information after the program has been
started (HHH, LLL, EE0, or EE1), then immediately unplug the appliance. See chapter
Solving Problems for further information.
7. Now, you can start the baking program by pressing the START/STOP button.
The program will automatically run various operations. You can watch the pro-
cess via the window in the lid of your Bread Maker. Occasionally, during bak-
ing, condensate could accumulate on the window.
tip:
The appliance lid can be opened during kneading, for example, to add further
ingredients. However, you should avoid opening the lid during operation if pos-
sible. This holds especially during the baking process, because the bread would
collapse.
tip:
If you remove the kneading paddle after the last kneading of the dough, the bread
will remain intact when you remove it from the bread pan.
cautIon – MOVING PARTS!
Do NOT remove the bread pan or grasp into the bread pan or insert any objects
(e.g. cooking utensils) into the bread pan with the appliance live, to avoid injuries
and damage due to the kneading works.
8. To remove the kneading paddle after kneading:
a. Pull the power plug out of the wall socket.
note:
When interrupting the power supply for no longer than approx. 10 minutes, the
current baking program is NOT terminated but will be continued as soon as you
plug in the power plug again. See: Tips for Best Results
b. Open the appliance lid and take out the bread pan. You can take the dough
out with floured hands and remove the kneading paddle.
c. Replace the bread pan containing the dough and close the appliance lid.
d. Push the power plug back into the wall power outlet. The baking program is
continued.
WarnInG – Hot Steam: Risk of Burns!
62