G) Entering The Place Of Residence; H) Switching The Display For Time/Date, City List And Sunrise/ Sunset Times; I) Setting The Time Zone, Language And Contrast - Conrad DV206NL Bedienungsanleitung

The entry is finished automatically when you case the last letter at the right end of the input
line by briefly pressing "SET".
Alternatively, the entry is terminated beforehand if no character is selected at an input
position (only the line "_" blinks) and then pressing the button "SET".
h) Switching the display for time/date, city list and sunrise/
sunset times
By briefly pressing the button "SET", you can switch between the selection list for the saved
cities, the sunrise and sunset times as well as the time and date display.

i) Setting the time zone, language and contrast

• Keep the button "SET" depressed (approx. 3 seconds) until "COUNTRY" appears on the
bottom of the display.
• Briefly press the button "SET", "ZONE +00HR" appears on the bottom of the display.
• You can set the desired time zone with the buttons "" and "".
• Briefly press the button "SET"; the currently set language for the text display appears on the
bottom of the display.
• Select the desired language with the buttons "" and "".
• Briefly press the button "SET", the currently set contrast value appears on the bottom of the
display.
• Select the contrast value for the LC display with the buttons "" and "".
• Terminate setup mode by briefly pressing the button "SET".
68