D) Installing The Radio Colour Table Clock With Weather Station; E) Switching On The Radio Colour Table Clock With Weather Station; F) Toggling Between The Weather Data Or Image Display; Setting The Display For Weather Data/Time - Conrad 67 20 91 Bedienungsanleitung

d) Installing the radio colour table clock with weather station

You can mount the radio colour table clock on the wall (using the opening on the back) or place it on a fl at, anti-slip
surface using the fold-out base.
The radio colour table clock is suitable for indoor use only. Avoid locations with direct sunlight or near to radiators and
windows. This can falsify the climatic data.

e) Switching on the radio colour table clock with weather station

• Connect the mains adapter to a suitable socket.
• Connect the mains lead to the power connection (19)
on the radio colour table clock
• Insert a suitable memory card into the slot on the right
side of the radio colour table block or place a USB
stick in the USB connection
• Switch on the radio colour table clock using the slide
switch on the back
After a short time, two symbols appear
denoting the two display types for images and weather.
• Use the "◄" / "►" buttons to select the symbol you require and press "ENTER" (9) to confi rm the selection

f) Toggling between the weather data or image display

The remote control buttons below allow you to change the desired display type directly:
• "WEATHER" (7) button: Toggles the display between weather data and time
• "SLIDE SHOW" (8) button: Switches to the slide show
• "SPLIT SCREEN" (9) button: Switches to the slide show and displays up to 4 reduced size images in the display
To change display type using the radio colour table block buttons:
• Press the "C" (14) button until you see the start screen and the two symbols (for images and weather)
• Use the "◄" / "►" buttons to select the symbol you require and press the middle key (1) to confi rm the selection
Images can be displayed only if a memory card is inserted into the slot or a USB stick is connected and
images are detected.

10. Setting the display for weather data/time

a) Setting the display format for weather data, date and time

• Press the button "WEATHER" (7) button (on the remote control)
• Press the "SETUP" (6) button
• The setting options are displayed in sequence below the main display.
• Use the "◄" / "►" buttons to select the setting you want
• Change the individual settings using the "▲" / "▼" buttons and the "ENTER" (1) button
To exit settings, press the "SETUP" (6) or "EXIT" (14) buttons.
31