J) Display For Barometric Pressure And Barometric Pressure Trend; Switching Units For Barometric Pressure; Bar Display For Barometric Pressure History; Temperature Trend - Conrad KW 9110 Bedienungsanleitung

j) Display for barometric pressure and barometric pressure trend

On the top right next to the time display you can read the present air pressure with the
correspondingly set unit (inHg, hPa/mBar).

• Switching units for barometric pressure

Hold the "+" button (7) on the back of the device for 3 seconds, the barometric pressure unit
changes between "inHg" and "mb/hPa".

• Bar display for barometric pressure history

The bar display which runs from left to right represents the development of the barometric
pressure for the last 12 hours.

When you use the device for the very first time, there are no readings present yet,
all bars are displayed at the same height.
• Barometric pressure trend
The arrow symbol in the top right of the display shows the barometric pressure trend.
Rising Decreasing
• Displaying barometric pressure readings for the past 12 hours
By pressing the "HISTORY" button (6)repeatedly, you can display the average barometric
pressure values for the last 12 hours at the top of the display.
On the left next to the barometric pressure, the respective hour is shown (e.g. "-5h", the
display value is the average barometric pressure 5 hours ago).
k) Moon phases
Using the DCF date (or the manually set date), the weather station calculates the present moon
phase. This is shown in an area in the bottom of the display.
New moon
58
Steady
Waxing moon Full moon Waning moon