Switching On And Off; Fig. 14 Display With All Its Symbols - Otto Bock B500-S Bedienungsanleitung

Operation
fig. 14 Display with all its symbols
1 Direction indicator, left
2 Battery capacity
3 Electric backrest
4 Electric seat tilt
5 Control panel
6 Drive-away lock
7 Speed level
8 Open end wrench
Page 112
9 Excess temperature
10 Direction indicator, right
11 Drive wheel brake
12 Warning
13 Creep speed
14 Power module
15 Drive motor
16 Light
03/2010
7.3.2 Switching On and Off
DAnGEr !
Danger to life if the brake fails to function!
The brake release lever must be locked when
using the power wheelchair. The automatic
brakes must be ready for operation and func-
tional.
DAnGEr !
Risk of accident as a result of insufficient or
excessive tyre pressure!
The power wheelchair must be visually
checked every time before it is used to make
sure that the tread depth is sufficient and
that the tyres are inflated to the correct tyre
pressure. Incorrect tyre pressure reduces the
tyres' service life and makes the wheelchair's
driving behaviour worse.
The control unit of the power wheelchair is switched on
and off by pressing the on/off button (see fig. 13, item 5).
If the control is not used for some time, the wheelchair is
switched off automatically. It is also possible to switch off
the power wheelchair with the on/off button during driv-
ing. In this case, the wheelchair brakes immediately until
it stops.
B500 | B500-S