WIKA CS6S Betriebsanleitung Seite 69

7. Descriptions of the operating characteristics
7.4 Monitoring output 2, 3-term control, deadband
Monitoring output
Monitoring output 1,
relay (OUT1)
Monitoring output 1,
logic level (OUT1)
Monitoring output 1
Analogue current
signal (OUT1)
Changes will occur continuously in accordance with the control deviation
Monitoring output
2, electronic relay
(OUT2)
Monitoring output 2,
logic level (OUT2)
Monitoring output 2
Analogue current
signal (OUT2)
LED monitoring
output 1 (OUT1)
LED monitoring
output 2 (OUT2)
_______ Heating
_ _ _ _ _ Cooling
in this range, ON or OFF
WIKA operating instructions models CS6S, CS6H, CS6L
P band heating
ON
Heating
OFF
Switching status, dependent upon the control deviation
+ +
DC 12 V
─ ─
Switching status, dependent upon the control deviation
+
+
DC 20 ... 4 mA
DC 20 mA
─ ─
ON
OFF
Deadband
Set point
+
DC 12/0 V DC 0 V
─
+
DC 4 mA
─
Switching status, dependent upon the control deviation
+
DC 0 V
─
Switching status, dependent upon the control deviation
+
DC 20 mA
─
Changes will occur continuously in accordance with the control deviation
P band cooling
Cooling
+ +
DC 12/0 V
─ ─
+ +
DC 20 ... 4 mA
DC 4 mA
─ ─
ON
EN
OFF
DC 12 V
OFF
ON
69