WIKA CS6S Betriebsanleitung Seite 43

6. Configuration
Characters,
factory setting
PV
9
SV
0
PV
 9
SV
00.00

PV
 9
SV
0
WIKA operating instructions models CS6S, CS6H, CS6L
Selected object, functions, range
Step 9: SV
Setting SV9
■
Setting range: Scaling lower to upper limit value
■
Only available when program control in "ON/OFF main function" (see chapter 6.5
"Engineering mode") is selected.
Step 9: Time
Setting the time of step 9
■
Setting range:
■
   
When is set, step 9 is paused and the fixed value control is
   
executed through use of the "Step 9: SV".
Only available when program control in "ON/OFF main function" (see chapter 6.5
"Engineering mode") is selected.
Step 9: Dwell time
Setting the delay time of step 9
■
Setting range: 0 to the converted value of 20 % of the input range
■
DC voltage, current inputs: 0 to converted value of 20 % of the scaling
span
Setting to 0 deactivates the delay function.
Only available when program control in "ON/OFF main function" (see chapter 6.5
"Engineering mode") is selected.
or 00:00 ... 99:59
EN
43