Herunterladen Diese Seite drucken

Limitatore Di Momento Jib (Gru X); Jib Load Limiting Device (X Crane) - HYVA HC101 Bedienungsanleitung

Werbung

B.9.4 LIMITATORE DI
M
OMENTO JIB (GRU X)
Come nel caso della gru standard, il
limitatore di momento interviene quando
il carico induce
un momento maggiore
d
i quello massimo impostato per la
macchina.
Il limitatore analizza costan
configurazione d
ella gru e i carico
a
gganciato analizzando le pressioni
indotte nel cilindro 1°braccio e nel
cilindro articolazione jib.
Con l'entrata in funzione del limitatore di
momento vengono disabilitati i comandi
come indicato nella seguente tabella.
2.braccio e jib sopra l'asse orizz
2.boom and jib over the horizontal line
2.Ausleger and Jib über der Horizontale
2.braccio sopra l'orizzontale e jib sotto l'asse orizzontale
2.boom over the horizontal line and jib under the horizontal line
2.Ausleger über der Horizontale and Jib unter der Horizontale
Movimenti consentiti
Permitted movements
Erlaubte Bewegungen
B.9.4 JIB LOAD LIMITING
D
EVICE (X CRANE)
As with standard crane models, the load
moment limiter is trigger
m
aximum load moment set for the
m
achine is reached.
temente la
The limiter constantly analyses the
co
nfiguration of the crane and the load
b
y reading the induced pressure values
on the 1st boom cylinder and the jib
joint cylinder.
When the load moment limiter is
triggered, all controls are disabled as
shown in the following table.
BLOCCO 1° BRACCIO - BLOCK OF 1.BOOM - SPERRE DES 1.AUSLEGER
ontale
ed when the
2.braccio sotto l'oriz ntale e jib sopra l'asse orizzontale
2.boom under the horiz
2.Ausleger unter der Horizontale and Jib über der Horizontale
2.braccio e jib sotto l'asse orizzontale
2.boom and jib under the horizontal line
2.Ausleger and Jib unter der Horizontale
Movimenti non consentiti
Denied movements
Verhinderte Bewegungen
B–50
B.9.4 MOMENTBEGRENZER
J
IB (X KRAN)
Wie beim Standardkran spricht der
Momentbegrenzer an, wenn die Last ein
höheres Moment erzeugt, als
d
ie
Maschine
Höchstmoment.
Der Begrenzer analysiert ständig die
K
onfiguration
des
Krans
e
ingehängten Last und liest die im
Zylinder des 1. Auslegers und im Jib-
Gelenkzylinder erzeugten Drücke ab.
Mit der Aktivierung des Momentbe-
grenzers
werden
die
deaktiviert, wie es in der folgenden
Abbildung angezeigt ist.
zo
on
tal line and jib over the horizontal line
das für
eingestellte
und
der
Steuerungen

Werbung

loading