OEG KSF-Pro Handbuch Seite 38

Para- Parameter name
meter
STAND-BY TIME FOR
P4.9
D. H. W. CIRCULATION
PUMP
Settings for boilers:
Para- Parameter name
meter
P5.1 MIN. LIQUID FUEL
BOILER TEMP.
P5.2
MIN. SOLID FUEL
BOILER TEMP.
P5.3 MIN. HEAT ACCUMULA-
TOR TEMP.
Settings for alternative energy sources:
Para- Parameter name
meter
P6.1 SWITCH-ON DIFFE-
RENCE FOR COLLEC-
TORS OR SOLID FUEL
BOILER
P6.2 SWITCH-OFF DIFFE-
RENCE FOR COLLEC-
TORS OR SOILD FUEL
BOILER
P6.3 MIN. TEMPERATURE
OF COLLECTORS OR
SOLID FUEL BOILER
Service setting manual
Parameter description
Setting of stand-by time for d. h. w. circulation pump.
Pump stand-by period is always followed by the pump
running period.
Parameter description
Setting of min. liquid fuel boiler temperature.
Setting of min. solid fuel boiler temperature.
Setting of min. temperature for heat transfer from storage
tank.
Parameter description
Setting of difference between solar collectors or solid fuel
boiler temperature and storage tank or heat accumulator
temperature by which the circulation pump shall switch-on.
Setting of difference between solar collectors or solid fuel
boiler temperature and storage tank or heat accumulator
temperature by which the circulation pump shall switch-off.
Setting of min. solar collector or solid fuel boiler temperature
to activate the circulation pump.
38
Setting range Default
setting
0 ÷ 60 min
10
Setting Default
range setting
10 ÷ 90 °C
35
10 ÷ 90 °C
55
20 ÷ 70 °C
30
Setting Default
range setting
5 ÷ 30 °C
12
1 ÷ 25 °C
4
10 ÷ 60 °C
35