OEG KSF-Pro Handbuch Seite 22

TIME PROGRAMS
* The setting is only available in schemes with two heating circuits.
User manual
OPERATION MODE FOR THE SECOND HEATING CIRCUIT*
Operation mode according to day temperature.
Requested room temperature is set on the controller.
Operation mode according to night temperature.
Requested room temperature is set on the controller.
Switch-off.
OPERATION MODE FOR D. H. W. WARMING
D. h. w. warming according to selected time program.
Permanent switch-on of d. h. w. warming.
Switch-off.
SELECTION OF OPERATION MODE HEATING OR COOLING
MANUAL OPERATION OF OUTPUTS
EMISSION ANALYSIS
TIME PROGRAM FOR THE FIRST HEATING CIRCUIT
The first time program.
The second time program.
TIME PROGRAM FOR THE SECOND HEATING CIRCUIT*
The first time program.
The second time program.
TIME PROGRAM FOR D.H.W.
The first time program.
The second time program.
Operation mode according to selected time program.
Requested room temperature is set on the controller or
room unit, if connected.
22