Technical Specifications; Operation; Assembling The Appliance - Gastroback 42606 DESIGN ESPRESSO PLUS Bedienungsanleitung

• The machine is purged automatically after generating steam, to do this, turn the
selector switch to the standby position (center).
• Always make sure that the portafilter inserted correctly into the grouphead before
operating the appliance. When brewing the espresso high pressure is produced
- risk of burns!
• Never remove the portafilter during brewing.
• Always wait until the appliance is cooled down to room temperature and empty
the water tank and the drip tray before moving or cleaning the appliance. Grasp
the appliance on both sides of the bottom of the appliance base (not the drip
tray!) If you want to move the appliance.

TECHNICAL SPECIFICATIONS

Model:
Power supply:
Power consumption:
Length of power cord:
Weight:
Dimensions:
Capacity of water tank:
Certification:

OPERATION

ASSEMBLING THE APPLIANCE

Before first use: remove all packaging and promotional materials. When you unpack
the appliance, the drip tray and water tank are already properly installed. The drip
tray is in the base of the appliance and can be pulled forward. The water tank is
in the back of the appliance and can be removed by lifting. Remove the packaging
material under the water tank.
Make sure that all parts and accessories are complete and undamaged before dis-
posing of the packaging. Accessories include: stainless steel double wall filter (sin-
gle filters, double filters and ESE filter pad), cleaning tool, filter holder, milk jug and
measuring spoon with tamper.
48
Art. No. 42606 Design Espresso Pro
230 - 240 V, 50 - 60 Hz
1,250 W
ca. 100 cm
ca. 5.64 kg
ca. 206 x 270 x 325 mm (width x depth x height)
1.7 Litre