Cleaning The Steam Wand - Gastroback 42606 DESIGN ESPRESSO PLUS Bedienungsanleitung

the exterior of the appliance with the appliance switched off and cooled down. For
cleaning, use soft damp cloth. Do not use abrasives or chlorine-containing cleaning
agent in any case!
Empty the drip tray in time. Do not wait until it is full to the brim.
WARNING: Grouphead, poratfilter, filter, steam wand and its attachment will be
very hot during operation. In addition when the appliance is in operation hot water
or steam can escape. Turn off the appliance first (press ›on/off‹-switch), unplug the
power cord from the outlet, wait until the appliance has cooled down and empty
the water tank and drip tray when not using the appliance, moving the appliance,
or cleaning the appliance.
• Never pour liquids over the appliance or power cord or immerse these into
liquids.
• Do not use abrasive cleaners or cleaning pads (e.g. metal scouring pads) for
cleaning. Do not clean the appliance with any corrosive chemicals (e.g. bleach).
Do not immerse the appliance or power cord in water or any other liquid. Do
not spill or drip any liquids on the appliance or on the power cord to avoid risk
of fire and electric shock. When liquids are spilled in the appliance, immediately
switch off, unplug the power cord and wait for the appliance to cool down. Never
use any hard or sharp objects for working with the appliance or for cleaning the
appliance. Do not apply any violence to prevent damage to the components when
operating the appliance.
• The cleaning tool contains a sharp needle. Be careful not to pierce yourself with
the needle. Never allow small children to play with the components and accesso-
ries of the appliance or the cleaning tool.

CLEANING THE STEAM WAND

Clean the steam wand each time after you have frothed milk, otherwise protein and
fat in the milk will form a solid crust, through which the steam wand and the ope-
nings in the attachment are clogged.
1. Make sure first that the appliance is in the standby position (the selector switch
is in the middle) and the steam wand and the attachment are no longer hot.
2. Remove the attachment from the steam wand and rinse the attachment in warm
water.
3. Wipe the steam wand with a damp cloth. Swing then the steam wand over the
drip tray and remove your hand from the steam wand.
4. Rotate the selector switch counterclockwise to the steam position. The milk resi-
dues will be rinsed from the inside of the steam wand.
5. Turn the selector switch clockwise back to the standby position. Press the ›on/
60