Technical Data; Unpacking - Scheppach Hp1400S Originalbetriebsanleitung

• Avoid accidental start-ups of the machine.
• Use the tool that is recommended in this operating
manual. This is how to ensure that your machine
provides optimum performance.
• Keep your hands away from the working area when
the machine is in operation.

6. Technical data

Engine / drive
Displacement
Engine output
Fuel content
Engine oil capacity
max.
Eccentric vibration
unit oil capacity
Plate size (L x W)
Centrifugal force
Feed
Vibration frequency
Compaction depth
Max. permissible
inclination for the
engine
CO output
2
Weight
Subject to technical changes!
Noise and vibration
The noise levels have been determined in accordance
with EN ISO 3744. Total vibration emission values (vec-
tor sum of three directions) determined per EN 500-1.
Noise can have serious effects on your health. If the
machine noise exceeds 85 dB, please wear suitable
hearing protection.
1-cylinder
4-stroke for unleaded
petrol
79 cm³
1.5 kW
1.6 l
0.4 l
0.06 l
ca. 495 x 320 mm
8200 N
25 m/min
5900 vpm
20 cm
20°
1016.4 g/kWh
approx. 48 kg
www.scheppach.com
Noise data:
Sound pressure level L
pA
Uncertainty K
pA
Sound power level L
WA
Uncertainty K
WA
Vibration parameters:
Vibration a
h
Uncertainty K
The specified sound levels have been measured in ac-
cordance with a standardised test procedure and can
be used to compare different tools with one another.
In addition, these values are suitable for estimating
the stresses for the user resulting from the noise in
advance.
Warning! Depending on how you use the tool, the ac-
tual values may differ from the those given. Implement
measures to protect against noise nuisance.
In doing so, take into account the complete working
process, including the times when the tool is working
without load or switched off.
Suitable measures include regular maintenance and
care of the tool and the insertion tools, regular breaks
as well as proper planning of the working process.
7.

Unpacking

• Open the packaging and carefully remove the product.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating instructions before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Spare parts
can be obtained from your specialist dealer.
• When ordering please provide our article number as
well as type and year of manufacture for the product.
85.4 dB
2.2 dB
105.4 dB
2.2 dB
17.5 m/s²
2.5 m/s²
GB | 35