Herunterladen Inhalt Inhalt Diese Seite drucken

Transport (Fig. 20); Cleaning And Maintenance; Cleaning Work - Scheppach Hp1400S Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für HP1400s:
Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
1.
Move the throttle (2) to the "idle" position to reduce
the load on the engine when not compacting.

11. Transport (Fig. 20)

m WARNING!
Danger of injury!
Unintended and unexpected start-up of the product
may lead to injuries.
- After loading, switch off the engine and, after the
engine has cooled down, remove the spark plug
connector from the spark plug.
- The product can cause severe crushing injuries due
to its own weight.
Allow the engine to cool down before transporting or
loading to avoid burns and to prevent fire hazards.
m The machine can fall and cause damage or injury if
it is not lifted properly.
When transporting over longer distances, drain the fuel
tank completely.
Secure the machine on the transport vehicle against
rolling, slipping or tipping over and also lash down the
plate compactor.
The transport frame facilitates handling. To do this, pull
the transport frame out of the hooks (17).
Maintenance plan
after 10
operating
hours
Air filter
Clean
Spark plug
Check
V-belt
Exciter oil
Engine oil level
Check
NOTE!
Risk of damage!
Water entering the housing can cause engine damag-
es. In addition, the jet of a high-pressure cleaner can
damage parts of the product.
- Clean the product with a cloth, hand brush, etc.
- Do not immerse the product in water or other liquids
and do not spray it with a high-pressure cleaner.
Push the guide bar forward with both hands. This raises
the machine slightly.
Now fold the transport frame under the plate compactor.
Proceed in reverse order when setting the machine
down.
ATTENTION: Only use the transport frame on a level
and solid surface and for short distances.

12. Cleaning and maintenance

m WARNING!
Danger of injury and burning!
The product can start unexpectedly and cause inju-
ries. In addition, temperatures of 80° C and more can
be reached.
- Switch off the motor before carrying out any clean-
ing or maintenance work.
- Allow the motor to cool down.
- Remove the spark plug cable from the spark plug.
m WARNING!
Health hazard!
Inhaling petrol/lubricant vapours may lead to severe
health damage, loss of consciousness and, in extreme
cases, to death.
- Do not inhale petrol/lubricant vapours.
- Operate the product outdoors only.
after 25 operating
Every 50
hours
operating hours
Clean
Clean
Replace

12.1 Cleaning work:

m WARNING!
Danger of injury!
Unintended and unexpected start-up of the product
may lead to injuries.
- Switch off the engine before carrying out any clean-
ing or maintenance work and after the engine has
cooled down, disconnect the spark plug connector
from the spark plug.
www.scheppach.com
Every 100
operating hours
Clean
Clean
Clean
Clean
Check
Replace
Replace
every 300
operating hours
Replace
Replace
Replace
GB | 39
Inhaltsverzeichnis
loading

Inhaltsverzeichnis