Fronius Roboterinterface Testing-System Bedienungsanleitung Seite 24

Description of (46) Indicator/selector "Job /Program BIT 0-7" ...
controls and
indicators
(continued)
For hexadecimal definition of the significant states of the eight binary input signals
"Job / Program BIT 0" up to "Job / Program BIT 7" (e.g. "1F hexadecimal" = "31
decimal" = "11111000" binary)
Important! You will find a table for converting decimal numbers to binary and
hexadecimal numbers in the section headed "Decimal / binary / hexadecimal num-
bers"
Indicator/selector "Operating bit 0-2" (45) shows "0" or "1" (i.e. either "Standard
program" or "Pulsed-arc program" mode is selected):
- Indicator/selector "Job /Program BIT 0-7" (46) is used here for selecting the
required program number
Indicator/selector "Operating bit 0-2" (45) shows "3" (Job mode):
- Indicator/selector "Job /Program BIT 0-7 (46) is used here for selecting the
required job number
10