Herunterladen Inhalt Inhalt Diese Seite drucken

Inspection Procedure - 3M Rollgliss R350 Gebrauchsanleitung

Rettungs- und fluchtgerät
Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 73
Model Number (Serial Number):
Date Purchased:
;
This product must be inspected by the user before each use. Additionally, a Competent Person other than the user must
inspect this equipment at least once each year.
Component
Rescue Device
(Figure 2)
Hand Winch (Accessory)
Connectors
(Figure 9)
Synthetic Rope Lifeline
(Figure 10)
Labels (Figure 8)
Fall Protection Equipment
;
If the product fails an inspection procedure, then the product fails overall inspection. If the product fails inspection, remove
it from service immediately. Clearly tag the product "DO NOT USE". See Section 5 for more information.
Inspection Type:
Inspected By:
Signature:
Additional Notes:
Figure 9 - Connectors
B
Table 2 – Inspection and Maintenance Log

Inspection Procedure

Inspect for loose fasteners.
Inspect all components for distortion, cracks, or other damage.
Ensure the lifeline pulls through the device smoothly.
Inspect the pulleys for damage and wear. Verify that the pulleys operate
smoothly. If any pulleys are damaged or are not working properly, then they
should be replaced.
Look for signs of corrosion on the entire unit.
Inspect all components for distortion, cracks, or other damage.
Inspect the pulleys for damage and wear. Verify that the pulleys operate
smoothly.
Inspect all connectors for signs of damage and corrosion. Verify that all
connectors are working properly. Where present: Gates (A) should open, close,
lock, and unlock properly; Swivel Eyes (B) should rotate without interference;
and locking buttons and pins should function correctly.
Inspect rope for Abrasion (A), Cut Strands (B), Pulled Strands (C), Melting (D),
Compression (E), Inconsistent Diameter (F), and Discoloration (G).
All labels are present and fully legible.
Additional Fall Protection equipment that is used with the product is installed
and inspected per the manufacturer instructions.
User
Competent Person
A
A
Date of First Use:
···
···
···
···
Overall Inspection Result:
Date of Inspection:
Next Inspection Due:
···
Figure 10 - Synthetic Rope Lifeline
A
B
C
D
Inspection Result
Pass
Pass
E
F
G
Fail
Fail
Inhaltsverzeichnis
loading

Inhaltsverzeichnis