Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Spares and wear-
ing parts
Calibration of
power sources
CE-marking
Copyright
64
Use only original spares and wearing parts (also valid for standard parts).
With parts sourced from other suppliers, there is no certainty that these parts
will have been designed and manufactured to cope with the stressing and
safety requirements that will be made of them.
When ordering spare parts, please state the exact designation and the
relevant part number, as given in the spare parts list. Please also quote the
serial number of your appliance.
In view of international standards, regular calibration of power sources is
advisable. Fronius recommends a 12-month calibration interval. For more
information, please contact your Fronius service centre!
The LaserHybrid welding head fulfils the fundamental requirements of the
Low-Voltage and Electromagnetic Compatibility Directive and is thus CE-
marked.
Copyright of these operating instructions remains with the manufacturer.
The text and illustrations are all technically correct at the time of printing. We
reserve the right to make changes. The contents of the operating instructions
shall not provide the basis for any claims whatsoever on the part of the pur-
chaser. If you have any suggestions for improvement, or can point out any
mistakes that you have found in the instructions, we will be most grateful for
your comments.
Werbung
