Denon ADV-700 Bedienungsanleitung Seite 7

AM LOOP
ANTENNA
(Supplied)
FMINDOOR
ANTENNA
(Supplied)
DIRECTIONOF
BROADCASTING
STATION
75 £2/oh ms_ FM ANTENNA
COAXIAL I
CABLE J
AM OUTDOOR
ANTENNA
////// y///
GROUND
FM ANTENNA
ADAPTER
(Supplied)
• An F-type FM antenna cable plug can be connected directly.
• If the FM antenna cable's plug is not of the F-type, connect using the included antenna adapter.
AM loop antenna assembly
f
Connect to the AM_
antenna terminals
(_) connection line. direction
antenna on top
any stable
surface.
Mount
antenna
attached to a _
wall
Installation hole
Mount on wall, etc _,
Connection of AM antennas
1. Push the lever. 2. insert the conductor. 3. Return the lever.
=> =>
Notes:
• Do not connect two FM antennas simultaneously,
• Even if an external AM antenna is used, do not disconnect
the AM loop antenna.
• Make sure AM loop antenna lead terminals do not touch
metal parts of the panel.
FM antenna adopter assembly
f 75 _/ohms COAXIAL CABLE "_
PULL
ANTEN/ A ADAPTER
_REMOVE
_ _c2v
CLAMP
• Use the commercially 21-pin SCART cable to connect the TV's 21-pin SCART terminal to the ADV-7OO's 21-pin SCART terminal
{AV 1),
• The audio and video signals for the function selected on the set are output.
Audio output signals
• The tuner and DVD audio playback signals and the audio signals input to the AUDIO INPUT jacks are output_
• When a Dolby Digital DVD is played, the audio signals are converted to 2-channel signals before being output. (Audio signals
are not output during DTS playback.)
• The audio output level is fixed. If you do not wish to play the sound on the connected TV, turn the TV's volume down to the
minimum.
Video output signals
• The DVD video playback signals and the video signals input to the VIDEO or S-VIDEO INPUT jacks are output.
• When playing a DVD, RGB video signals can also be output.
• The selection of the VIDEO, S-VIDEO and DVD RGB video signals is set at "AVl VIDEO OUTPUT" system setup item. (By
default all are set to "VIDEO". See page 16.)
NOTES:
• Some discs contain copy prohibit signals. If such discs are • Set the "TV TYPE" in "VIDEO SETUP" in "DVD SETUP"
played via a VCR, the copy prohibit system may cause to comply with your TV's video format. When the TV is
disturbance in the picture. PAL formated, set to PAL. (See page 42.)
7