Denon ADV-700 Bedienungsanleitung Seite 6

* To connect the video signal, connect using a 75 _/ohms video signal cable cord. Using an improper cable can result in a drop in
video quality.
* When making connections, also refer to the operating instructions of the other components.
I Connecting a TV/DBS tuner I
TV/DBS
• Connect the TV's or DBS tt_ner's video ot_tpt_tjack
(VIDEO OUTPUT)to the _ (yellow/TV/DBS IN
jack using a 75 £)Johmsvideo coaxialpin plug cord 1%
/
• Connect the TV's or DBS tuner's audio output jacks
(AUDIO OUTPUT)to the _ TV/DBS IN jacks
using pin plug cords
• For devices with optical digital outputs, connect the
digkal output terminal to the ADV-TOO'sDIGITAL
TV/DBS IN terminal using an optical transmission
cable.
TV or DBS tuner
_ooo_ o oo
I Connecting a video decks 1
Video input/output connections:
" Connect the video deck's video output jack (VIDEO OUT) to the _ (yellow)
VCR IN jack, and the video deck's video input jack (VIDEO IN) to the
(yellow) VCR OUT jack using 75 D/ohms video coaxial pin plug cords.
Connecting the audio output jacks
• Connect the video deck's audio output jacks (AUDIO OUT) to the _ VCR IN
jacks, and the video deck's audio input jacks (AUDIO IN) to the _ VCR OUT
jacks using pin plug cords.
Monitor TV
terminal t_singan Opticaltransmission cable.
MONITOR OUT CS tuner
.c ..... tthe sv,doo,npot [_ oo]
iack (VIDEO INPUT) to the
"--_]
MONITOR OUT iack _:_° o
using a 75 _2/obms video
coaxialpin plug cord VIDEO AUDIO )PTICAL
[ Connecting a CS tuner ]
V.AUX
• Connect the CS tt_ner's video output jack (VIDEO OUTPUT)
to the _ (yellow) VAUX IN jack using a 75 _)/ohms
video coaxial pin plug cord
• Connect the CS tuner's audio output jacks (AUDIO
OUTPUT) to the @ VAUX IN iacks using pin plug
cords
• For devices with optical digital outputs, connect the digital
output terminal to the ADW7OO's DIGITAL VAUX IN
Video deck
• When making connections, also refer to the operating instructions of the other components.
• A note on the S input jacks
The input selectors for the S inputs and pin jack inputs work in conjunction with each other.
• Precaution when using S-jacks
This unit's S-jacks (input and output) and video pin jacks (input and output) have independent circuit structures, so that video
signals input from the S-jacks are only output from the S-jack outputs and video signals input from the pin jacks are only output
from the pin jack outputs.
When connecting this unit with equipment that is equipped with S-jacks, keep the above point in mind and make connections
according to the equipment's instruction manuals.
[ Connecting a monitor TV ]
MONITOR OUT
• Connect the TV's S video input (S-VIDEO
INPUT) to the _ MONITOR OUT
jack using a S jack connection cord.
Monitor TV
[ Connecting a TV/DBS tuner ] [ Connecting a CS tuner ]
• Connect the TV's or DBStuner's S • Connectthe CStuner's S video output
video output jack (S-VIDEO jack (S-VIDEO OUTPUT) to the
OUTPUT) to the _ TV/DBS _ MAUX. IN jack using an S
IN jack using an S jack connection jack connection cord.
cord.
CStuner
TV or DBS tuner r _ ._
= ._ j [ .... _ °L_,
c_ooo_ o oo '_
Connect the components' audio inputs
and outputs as described on page 6.
[ Connecting the video decks]
L _
Video deck
• Connect the video deck's S output jack (S-OUT) to the
VCR IN jack and the video deck's S input jack (S-IN)
to the _ VCR OUT jack using S jack connection cords.
S-VI t 0 S-VIDEO
OUT
NOTES:
• Connect this unit video outputs to the TV either directly. • Set the "TV TYPE" in "VIDEO SETUP" in "DVD SETUP"
Do not connect it via a VCR (video cassette recorder), to comply with your TV's video format. When the TV is
Some discs contain copy prohibit signals. If such discs are PAL formated set to PAL.
played via a VCR, the copy prohibit system may cause
disturbance in the picture.
6