Denon ADV-700 Bedienungsanleitung Seite 30

Use this function to automatically tune to FM stations that provide RDS service.
2
3
3O
Set the band to "FM".
Remote control unit
SUBTIT_
Remote control unit
Press the RDS button until "RDS
SEARCH" appears on the display.
Remote control unit
Press the TUNING + (UP) or -
(DOWN) button to automatically
begin the RDS search operation.
When a broadcast station is found, that station's name
appears on the display.
• If no RDS station is found when all the frequencies are
searched, "NO PROGRAMME" is displayed.
Before operating the remote control
unit!
• Be sure to set the AV mode using
the remote control
mode selector buttons, f--_
0000
® _ ®
t-- _----_ G ......
3--
2--
Use this function to find RDS stations broadcasting a designated program type (PTY).
For a description of each program type, refer to "Program Type (PTY)".
Set the band to "FM". 4
Press the TUNING + (UP) or -
(DOWN) button to automatically
begin the PTY search operation.
2
Remote control unit
SUbTiLE
Remote control unit
Press the RDS button until "PTY
SEARCH" appears on the display.
AUD_0 Watching the display, press the
(_. PTY button to call out the desired
program type.
Remote control unit
Remote control unit
The station name is displayed on the display after
searching stops.
• If no station broadcasting the designated program type is
found when all the frequencies are searched, "NO
PROGRAMME" is displayed.
Use this function to find RDS stations broadcasting traffic program (TP stations)
Set the band to "FM". 3
Press the TUNING + (UP) or -
(DOWN) button TP search begins.
Remote control unit
Remote control unit
The station name is displayed on the display after
searching stops.
2
SUbTiLE
Remote control unit
Press the RDS button until "TP
SEARCH" appears on the display.
• If no TP station is found when all the frequencies are
searched, "NO PROGRAMME" is displayed.
"RT" appears on the display when radio text data is received.
1
TOP M_U
%
Remote control unit
To turn the RT mode on, press the
RT button on the remote control
unit until the RT indicator is lit.
When the station currently tuned in is offering a radio
text message service, the message scrolls on the
display.
• When the RT mode is turned on while an RDS radio station
not offering an RT service is tuned in, "NO TEXT DATA" is
displayed on the display, then the mode automatically
switches to the PS mode.
• In the same way, the mode automatically switches to the PS
mode when the RT service is finished, tn this case, the
mode automatically switches from the PS mode back to the
RT mode when an RT broadcast is resumed.
• The RT mode cannot be set in the AM band or for FM
stations not offering RDS broadcasts.
• To turn the RT mode off, press the RT button and switch to
the desired display mode.