Atlas Copco MT Focus 400 Produktanweisungen Seite 21

MT Focus 400
Closing the cover
1. Close the housing.
NOTICE
• Make sure the display and the USB isolator is in correct position.
• Make sure the flat cable does not get harmed.
2. Mount the four screws.
Controller software update
Please refer to User guide 9836 5312 01: MicroTorque Controller – Software
update.
Controller upgrade
To upgrade the controller from 400B to 400A, contact Support for a new li-
cense No. Please refer to User guide 9836 5637 01: ToolsTalk MT.
EN
© Atlas Copco Industrial Technique AB - 9836 629400 00
Service instructions
21