Atlas Copco MT Focus 400 Produktanweisungen Seite 14

Product Instructions
6. If required, enter the password. Use the OK button to select a position and
the UP or the DOWN buttons to select the number.
7. Select the number of tightenings in the batch.
8. Press OK.
To increment the batch number:
1. Press either the UP or the DOWN button
2. Select Batch control in the menu.
3. Press OK.
4. Select Increment batch in the menu.
5. Press OK.
To decrement the batch number:
1. Press either the UP or the DOWN button
2. Select Batch control in the menu.
3. Press OK.
4. Select Decrement batch in the menu.
5. Press OK.
To reset the batch number:
1. Press either the UP or the DOWN button
2. Select Batch control in the menu.
3. Press OK.
4. Select Reset batch in the menu.
5. Press OK.
Auto-start
If Auto-start has been enabled from ToolsTalk, an extra menu option, Auto-
start, appears.
To activate Auto-start:
1. Select Auto-start control in the menu.
2. Press OK.
3. Select Auto-start ON.
4. Press OK.
To de-activate Auto-start:
1. Select Auto-start control in the menu.
2. Press OK.
3. Select Auto-start OFF.
4. Press OK.
To temporarily disable Auto-start:
14
EN
© Atlas Copco Industrial Technique AB - 9836 629400 00
MT Focus 400