TR-Electronic LMRS_27 Interface-Box SSI Gesamt-Bedienungsanleitung Seite 42

The mounting material for the position sensor should absolutely consist of not
magnetizable material.
If magnetizable mounting material is used, a spacer from not magnetizable material
with 10 mm thickness and min. 3 mm must be planned more largely in the distance to
the extent of the position sensor. The spacer is to be installed between the position
sensor and its attachment. The screws must be from not magnetizable material.
Printed in the Federal Republic of Germany
03/17/2021 TR-ELA-BA-DGB-0004 v16
 TR-Electronic GmbH 2007, All Rights Reserved
Page 41 of 51