Basic Safety Instructions; Definition Of Symbols And Instructions; Obligation Of The Operator Before Start-Up - TR-Electronic 65 Serie Gesamt-Bedienungsanleitung

2 Basic safety instructions

2.1 Definition of symbols and instructions

2.2 Obligation of the operator before start-up

As an electronic device the measuring system is subject to the regulations of the EMC
Directive.
It is therefore only permitted to start up the measuring system if it has been
established that the system/machine into which the measuring system is to be fitted
satisfies the provisions of the EU EMC Directive, the harmonized standards, European
standards or the corresponding national standards.
Printed in the Federal Republic of Germany
08/23/2016
means that death or serious injury can occur if the required
precautions are not met.
means that minor injuries can occur if the required
precautions are not met.
means that damage to property can occur if the required
precautions are not met.
indicates important information or features and application
tips for the product used.
means that appropriate ESD-protective measures are to be
considered according to DIN EN 61340-5-1 supplementary
sheet 1.
TR - ECE - BA - DGB - 0046 - 06
 TR-Electronic GmbH 2005, All Rights Reserved
Page 31 of 43