General information
1.2 References
EN 50325-4
1.
2.
CiA DS-301
3.
CiA DS-406
IEC/PAS 62408
4.
IEC 61158-300
5.
IEC 61158-400
6.
IEC 61158-500
7.
IEC 61158-600
8.
IEC 61784-2
9.
ISO/IEC 8802-3
10.
ISO 15745-4 AMD 2
11.
IEEE 1588-2002
12.
13. RFC768
14. RFC791
15. RFC1213
TR-Electronic GmbH 2008, All Rights Reserved
Page 102 of 187
Industrial Communication Systems, based on
ISO 11898 (CAN) for Controller Device Interfaces.
Part 4: CANopen
CANopen communication profile based on CAL
CANopen profile for encoders
Real-time Ethernet Powerlink (EPL);
International Electrotechnical Commission
Digital data communications for measurement and control
- Fieldbus for use in industrial control systems
- Part 300: Data Link Layer service definition
Digital data communications for measurement and control
- Fieldbus for use in industrial control systems
- Part 400: Data Link Layer protocol specification
Digital data communications for measurement and control
- Fieldbus for use in industrial control systems
- Part 500: Application Layer service definition
Digital data communications for measurement and control
- Fieldbus for use in industrial control systems
- Part 600: Application Layer protocol specification
Digital data communications for measurement and control
- Additional profiles for ISO/IEC 8802-3 based
communication networks in real-time applications
Carrier Sense Multiple Access with Collision Detection
(CSMA/CD) Access Method and Physical Layer Specifications
Industrial automation systems and integration
- Open systems application integration framework
- Part 4: Reference description for Ethernet-based control systems;
Amendment 2:
Profiles for Modbus TCP, EtherCAT and ETHERNET Powerlink
IEEE Standard for a Precision Clock Synchronization
Protocol for Networked Measurement and Control Systems
Defines the User Datagram Protocol (UDP)
Defines the Internet Protocol (IP)
Defines the IP Group and Interface Group, among others
TR - ECE - BA - DGB - 0071 - 05
Printed in the Federal Republic of Germany
06/26/2017