Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Fig. 7.4
Example diagram of installation with knuckle eye
3. Shaft surface quality and hardness
The recommended surface roughness is ≤ 10 μm.
The shaft must have a minimum hardness of 50 HRC.
20
Customer's construction
Customer's shaft holder
Shaft
Recommended play,
see Tab. 7.4, page 19
Threaded connector for mounting
on force transducers
MECHANICAL INSTALLATION
U9C
Werbung
Inhaltsverzeichnis
