Scope Of Supply, Accessories, And Variants - HBK U9C Montageanleitung

3

SCOPE OF SUPPLY, ACCESSORIES, AND VARIANTS

Scope of supply
S
U9C force transducer
S
U9C mounting instructions
S
Test report
Accessory
Description
KAB168-5, PUR connection cable with M12 8-pin socket, 5 m long,
free ends on opposite side. To connect the amplifier module to
the downstream electronics. Not suitable for use with the IO-Link
interface.
KAB168-20, PUR connection cable with M12 8-pin socket,
20 m long, free ends on opposite side. To connect the amplifier
module to the downstream electronics. Not suitable for use with
the IO-Link interface.
Knuckle eye for nominal (rated) forces 50 N to 1 kN
Knuckle eye for nominal (rated) forces 2 kN to 20 kN
Knuckle eye for nominal (rated) force 50 kN
Equipment variants
All force transducers are available in different versions. The following options are
available:
1. Cable
The U9C is equipped with a cable 1.5 m long in the standard version. You can also
order the force transducer with the following cable lengths:
- 3 m
- 5 m
- 6 m
- 7 m
- 12 m
2. Device plug/electrical connection
We can mount one of the following connectors on the U9C if requested:
8
SCOPE OF SUPPLY, ACCESSORIES, AND VARIANTS
Ordering number
1-KAB168-5
1-KAB168-20
1-Z8/100kg/ZGW
1-U9/20kN/ZGWR
1-U9a/50kN/ZGW
U9C