HBK U9C Montageanleitung Seite 47

Trigger
Nominal (rated)
force undershot
Operating force
range exceeded
Operating force
range undershot
Permissible
oscillation stress
exceeded, 10%
of dynamic
overload reserve
reached.
Permissible
oscillation stress
exceeded, 20%
of dynamic
overload reserve
reached.
U9C
ELECTRICAL CONNECTION
Type of Note
event
Warning Please note
that on tensile/
compressive
force sensors
(e.g., U9C) this
event is
triggered if the
nominal
(rated) range
of the tensile
force is not
observed.
Warning
Warning Please note
that on tensile/
compressive
force sensors
(e.g., U9C) this
event is trig­
gered if the
operating
range of the
tensile force is
not observed.
Message
Message
EVENT Description
ID
6146 0x1802 type="Warn­
ing">Nominal Limit
Exceeded – Maximum
nominal pull force was
overrun
6147 0x1803 type="Warn­
ing">Usage Limit Exceeded
– Maximum usage push
force was overrun
6148 0x1804 type="Warn­
ing">Usage Limit Exceeded
– Maximum usage pull
force was overrun
6161 0x1811 type="Notifica­
tion">10% Oscillation
Bandwidth – The sensor
reached 10% of its rated
oscillation strength
6162 0x1812 type="Notifica­
tion">20% Oscillation
Bandwidth – The sensor
reached 20% of its rated
oscillation strength
45