Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8.4.11
Data Storage - USB Memory Stick
The following data is saved in the DG3 and, if necessary, can be copied onto a standard
USB memory stick:
•
5000 individual tapping processes
•
250 error messages
•
Consumption data (water consumption, chemical consumption, lifetimes)
•
System configuration
Entry into programming level.
(Also refer to chapter
The following display has to be selected:
Fig. 8.48
Data storage - USB memory stick
The data is saved as follows in the subdirectory "DG3":
1) For analysis using an Excel template
DG3-DATA_ddmmyyyy_hhmmss.CSV
Whereby: hhmmss = time in the format hours / minutes / seconds
2) For direct output to a printer
•
Configuration
•
Saving as a TXT file
DG3-CONF_ddmmyyyy_hhmmss.TXT
Whereby: hhmmss = time in the format hours / minutes / seconds
The function and operation of the Excel template are described in chapter
Data and Configuration".
8.4.12
Delete functions
The following delete functions are available:
1) Deletion of the operating and error message
memory
2) Deletion of all data (operating and error
message memory, resetting the setting
parameters to the factory delivery status).
Deletion procedure:
Entry into programming level.
(Also refer to chapter
Entry to the delete functions
Select
Now start the delete process by means of
Exit programming mode again.
417102242_DG_3
8.2
"Programming Structure" and
ddmmyyyy =
date in the format day/month/year
ddmmyyyy =
date in the format day/month/year
8.2
"Programming Structure" and
in the display and activate it by pressing
8.4.1
All data, output in a file:
"DG3-DATA_ddmmyyyy_hhmmss.CSV"
Exclusively configuration, output in a file:
"DG3-CONF_ddmmyyyy_hhmmss.TXT"
8.4.1
.
- 82 -
"Operation Handling").
14
"Operating
Fig. 8.49
Delete function 1
Fig. 8.50
Delete function 2
"Operation Handling").
.
Rev.: 02-05.2014
Werbung
Inhaltsverzeichnis
