1.1.3
Lists
Lists that are marked with this prefix () describe an activity which the technician / user
must perform.
1.1.4
Series of EBS numbers
Both item numbers and EBS numbers are shown in these operating instructions. EBS
numbers are Ecolab-internal item numbers and are used "within the group".
1.2
Scope of warranty
The manufacturer only guarantees the operational safety, reliability, and performance of the
metering unit under the following conditions:
• All assembly, connection, calibration, service and repair activities must be performed by
authorised and trained technical personnel.
• The metering unit is used in accordance with the specifications as given in the technical
manual.
• Only original equipment spare parts are to be used for repairs.
• Only "validated
If products other than
validated with the metering unit in accordance with BAM 2004-47; 67 to 72.
The general warranty and service conditions of
otherwise apply.
1.3
Contact address/Manufacturer
Ecolab-Engineering GmbH
Raiffeisenstraße 7
83313 Siegsdorf, Germany
Telephone (+49) 86 62 / 61 0
Telefax (+49) 86 62 / 61 219
E-mail:
engineering-mailbox@ecolab.com
417102242_DG_3
Ecolab
products" are to be used.
Ecolab
products are used, we recommend that the product be
Ecolab Engineering GmbH
Fig. 1.1
QR code: Contact address for Ecolab Engineering
- 60 -
will
Rev.: 02-05.2014