Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8.3
Access code programming level
Programming mode must be activated in order to change the basic
settings and to calibrate the system.
For this purpose, press the
appears:
NOTE
Access code factory setting: 1234
The access code can be entered by pressing the buttons
Press
to apply the value and to enter programming level. For comparisons, also refer
to chapter
8.2
In order to facilitate handling during startup / maintenance, the access code remains
inactivated for 15 min. after being entered. When you exit and re-enter programming mode,
it does not need to be re-input during this time.
8.4
Setting
8.4.1
Operation Handling
Selection of functions (displays):
Setting is performed by selecting the appropriate icons using the
buttons and activation by means of
For comparisons, also refer to chapter
Changing values and saving:
•
When a display is entered, it appears with green background lighting.
•
If a value is changed, the background color turns yellow.
•
A changed value has to be saved. To do this, select the save icon
saving sequence via
on the "Exit" icon
•
The function can be exited by means of
switch to the next menu by pressing
8.4.2
Factory setting
The device is set to the following values whilst still at the factory:
Concentration 1:
Concentration 2:
Hygienic flush:
Selective tap quantity selection: not activated
Staff code:
Date / Time:
417102242_DG_3
button for 5 seconds. The following
"Programming Structure".
. The display then turns green again, and the cursor appears
.
0.5 %
5.0 %
not activated
not activated
current value
(summer/winter time may possibly not be switched)
.
8.2
"Programming Structure".
, or if there are multiple menus, you can
.
- 76 -
Fig. 8.30
Access code programming level
,
,
,
.
,
,
,
and start the
Rev.: 02-05.2014
Werbung
Inhaltsverzeichnis
