Declaration Of Conformity - Checchi & Magli TOP 24 Bedienungs- Und Wartungsanleitung

Permitted gradients
The ground conditions (slippery, sloping, etc.) and the
type of tractor used can reduced the stability of the
tractor/work vehicle assembly and cause sudden, dan-
gerous movements, especially when the work vehicle is
lifted off the ground.
The tractor driver is responsible for assessing the hazards

Declaration of conformity

CHECCHI & MAGLI s.r.l.
Via Guizzardi n° 38
40054 – BUDRIO (BOLOGNA) - ITALY
Hereby declares, under its own responsibility that the
planting machine in question, i.e. models TOP 24/2 - 24/4
- 24/6 - 24/8, comply with the Essential and Health Safety
Requirements provided for by Directive 2006/42/CE.
Guards
WARNING
Do not use the machine without the guards in place.
The work vehicle is fitted with guards covering the trans-
A
UN41-0880UA
The guards (A - B) protect the operator from unexpected
contact with the moving parts of the Rapid Shift gear-
box.
The guard (C) protects the operator from unexpected
contact with the moving parts of the transmission unit.
English language
TECHNICAL INFORMATION
associated with envisaged environmental conditions,
e.g., specific ground conditions (loose soil, slippery, slop-
ing ground, etc..) which require special precautions, and
it is up to the driver to take the necessary measures to
eliminate or reduce these hazards.
The following regulations in particular have been ap-
plied: UNI EN ISO 12100-1, UNI EN ISO 12100-2 and UNI
EN 13857, on machine safety.
Budrio CHECCHI & MAGLI s.r.l
Legal representative
Nerio Checchi
mission components to prevent accidental contact with
the moving parts.
The illustration highlights the guards installed on the
work vehicle shown.
C
D
E
A
B
The guards (D - E) protect the operator from unexpected
contact with the moving parts of the drive wheels.
The guards (F - G) protect the operator from unexpected
contact with the moving parts of any planting module.
5
2
F
G
D E
Use and maintenance