Declaration Of Conformity - Checchi & Magli WOLF PRO Bedienungs- Und Wartungsanleitung

Optional accessories (WOLF PRO COMPACT)
Standard WOLF PRO drilling cup (A)
Long WOLF PRO drilling cup (B)
WOLF PRO (6x6) drilling cup (C)
WOLF PRO (8x8) drilling cup (D)
Root ball insert (4x4) for long cup (6x6 - 8x8)
Kit containing pair of WOLF PRO phasing units
Transversal 2-shelf tray holder, COMPACT- 200 cm
Kit containing shelf for 200 cm transversal tray holder
Transversal 2-shelf tray holder, COMPACT- 250 cm
Kit containing shelf for 250 cm transversal tray holder
Transversal 2-shelf tray holder, COMPACT- 300 cm
Kit containing shelf for 300 cm transversal tray holder
Transversal 2-shelf tray holder, COMPACT- 350 cm
Kit containing shelf for 350 cm transversal tray holder
Transversal 2-shelf tray holder, COMPACT- 400 cm
Kit containing shelf for 400 cm transversal tray holder
Manual row tracers, 150 cm, with transversal tray holder coupling
Hydraulic row tracers with discs
WOLF PRO unit watering device
Watering device for WOLF PRO 1-3-row machine
Watering device for WOLF PRO 4-6-row machine (250 cm additional, screw-fastened frame only)
Raised planting unit locking kit
WOLF PRO front compactor roller, Ø 250 x 180
Special supplementary seat padding
Permitted gradients
The ground conditions (slippery, sloping, etc.) and the
type of tractor used can reduced the stability of the
tractor/work vehicle assembly and cause sudden, dan-
gerous movements, especially when the work vehicle is
lifted off the ground.

Declaration of conformity

CHECCHI & MAGLI s.r.l.
Via Guizzardi n° 38,
40054 – BUDRIO (BOLOGNA) - ITALY
Hereby declares, under its own responsibility that the
planting machine in question, i.e. models WOLF PRO/1,
WOLF PRO/2, WOLF PRO/3, WOLF PRO/4, WOLF
PRO/5, WOLF PRO/6, WOLF PRO COMPACT/2, WOLF
PRO COMPACT/3, WOLF PRO COMPACT/4, WOLF PRO
COMPACT/5, WOLF PRO COMPACT/6, comply with the
English language
TECHNICAL INFORMATION
Optional accessories WOLF PRO COMPACT
It is up to the tractor driver to assess the environmen-
tal conditions of the work area and not to exceed the
permitted gradients established for the tractor with the
equipment mounted on it (see tractor user manual).
Essential and Health Safety Requirements provided for
by Directive 2006/42/CE.
The following regulations in particular have been ap-
plied: UNI EN ISO 12100-1, UNI EN ISO 12100-2 and UNI
EN 13857, on machine safety.
Budrio
CHECCHI & MAGLI s.r.l
Legal representative
Nerio Checchi
8
2
Use and maintenance