Unpacking And Assembly - Checchi & Magli TOP 24 Bedienungs- Und Wartungsanleitung

Unpacking and assembly

During unpacking, check that the components are in
good condition and tally with the number stated; in the
event of damage, report the damage to the retailer or
directly to the manufacturer within 8 days of receiving
the machine.
The packing materials must be appropriately disposed
of or recycled in accordance with the laws in force.
The illustration provides a brief outline of the work vehi-
cle assembly diagram with two planting units.
8
UN41-0885UA
Lifting the work vehicle
WARNING
During lifting watch out for the load swinging, as
the hook-up point is never perfectly at the centre of
gravity.
English language
HANDLING AND ASSEMBLY INFORMATION
4
7
5
The assembly procedure shown applies for all the work
vehicle models specified in the manual.
WARNING
The assembly of the work vehicle must be carried out
at an authorised service centre or at company facili-
ties equipped with appropriate equipment and suit-
ably trained personnel, in order to guarantee safety
during unpacking and installation.
6
The lifting procedure shown applies for all the work ve-
hicle models specified in the manual.
For models TOP 24/2, TOP 24/6, the seat must be re-
moved to allow the lifting means to be fitted.
The illustration shows the work vehicle with two plant-
ing units.
10
4
2
1
3
Use and maintenance