General Information - Checchi & Magli TOP 24 Bedienungs- Und Wartungsanleitung

Aim of the manual
This instruction manual is produced by the manufacturer
to provide all those who have dealings with the planting
machine (which may also be referred to hereinafter as
the 'work vehicle') with all the necessary information and
criteria to apply for its use.
Apart from adopting good use practices, operators
(in compliance with their job responsibilities) are also
required to read and understand the information con-
tained in this manual and put it into practice exactly as
stated.
The original instructions are provided by the manufac-
turer in English.
To fulfil legal or commercial requirements, the original
instructions may be supplied by the manufacturer in
other languages.
This manual is an integral part of the work vehicle.
The manual must be kept for the entire life of the work
vehicle in a known and easily accessible place, available
to operators when it is necessary to consult it.
If the work vehicle is sold on, the seller is required to pass
on the manual to the new owner.
Manufacturer's registration details and work vehicle identification details
The plate shown, which is applied directly to the work
vehicle, contains all the essential information for identi-
B
C
UN41-0001AF
Annexed documentation
Along with this handbook, the customer is given the
documentation specified.
English language

GENERAL INFORMATION

F
D E
To highlight certain parts of the manual's contents
deemed important for safety or information reasons the
following symbols have been used, whose meanings are
outlined below.
DANGER
This indicates information or procedures which, if
not strictly followed, cause death or serious personal
injury.
WARNING
This shows information or procedures which, if not
followed, may cause death or serious personal in-
jury.
CAUTION
This shows information or procedures which, if not
followed, may cause slight personal injury.
NOTICE
This shows information or procedures which are im-
portant to follow in order to prevent malfunctions or
physical damage.
fying the machine and the manufacturer.
A) Manufacturer's identification details
B) Work vehicle type
C) Work vehicle model
D) Work vehicle gross weight
E) Serial number
F) Year of manufacture
- The instructions for use and maintenance of any op-
tional units that may be fitted on the work vehicle
- EC Declaration of conformity for the work vehicle.
1
1
Use and maintenance