Declaration Of Conformity - Checchi & Magli TEXDRIVE BEST Bedienungs- Und Wartungsanleitung

Seedling size
The table shows the type and size of seedlings that the work vehicle can plant.
C
D
B
A
UN41-0133NI
Plant spacing distance
The work vehicle plants seedlings with variable spacing
options.
Permitted gradients
The ground conditions (slippery, sloping, etc.) and the
type of tractor used can reduced the stability of the
tractor/work vehicle assembly and cause sudden, dan-
gerous movements, especially when the work vehicle is
lifted off the ground.

Declaration of conformity

CHECCHI & MAGLI s.r.l.
Via Guizzardi n° 38
40054 – BUDRIO (BOLOGNA) - ITALIA
hereby declares, under its own responsibility that the
planting machine in question, i.e. models
TEXDRIVE BEST/1, TEXDRIVE BEST/2,
TEXDRIVE BEST/3, TEXDRIVE BEST/4, TEXDRIVE BEST/5,
TEXDRIVE BEST/6, TEXDRIVE BEST DT/2, TEXDRIVE BEST DT/3,
TEXDRIVE BEST DT/4, TEXDRIVE BEST DT/5,
TEXDRIVE BEST DT/6, TEXDRIVE BEST DT/7,
English language
TECHNICAL INFORMATION
Seedling size
C
D
A
B
For the range of possible spacing options, see "Adjusting
the plant spacing".
The tractor driver is responsible for assessing the hazards
associated with envisaged environmental conditions,
e.g., specific ground conditions (loose soil, slippery, slop-
ing ground, etc. . ) which require special precautions, and
it is up to the driver to take the necessary measures to
eliminate or reduce these hazards.
comply with the Essential and Health Safety Require-
ments provided for by Directive 2006/42/CE.
The following regulations in particular have been ap-
plied: UNI EN ISO 12100-1, UNI EN ISO 12100-2 and UNI
EN 13857, on machine safety.
Budrio
CHECCHI & MAGLI s.r.l
Legal representative
Nerio Checchi
7
min.
A (cm)
max.
min.
B (cm)
max.
min.
C (cm)
max.
min.
D (cm)
max.
Use and maintenance
2
1,5
6
4
7
8
20
12
27