Declaration Of Conformity - Checchi & Magli PLASTIC-STOP PLUS Bedienungs- Und Wartungsanleitung

Declaration of conformity

CHECCHI & MAGLI s.r.l.
Via Guizzardi n° 38
40054 - BUDRIO (BOLOGNA) - ITALIA
We hereby declare, under our own responsibility, that
the "PLASTIC MULCHING MACHINE" models PS 14 and
PS 19 comply with the Essential and Health Safety Re-
quirements provided for by Directive 2006/42/EC.
Information and safety signs
Danger - Warning
Check that all the plates are legible; if they are not,
clean them or - if they are damaged - replace them,
applying the new ones in the same place as the old
ones.
E
E
UN41 0231IH
A) Hazard plate: read the use and maintenance manual
before using the work vehicle.
B) Hazard plate: switch off the tractor; remove the igni-
tion key and store in a safe place before carrying out
any type of work on the work vehicle.
English language
TECHNICAL INFORMATION
The following regulations in particular have been ap-
plied: UNI EN ISO 12100-1, UNI EN ISO 12100-2 and UNI
EN 13857, on machine safety.
Budrio
CHECCHI & MAGLI s.r.l
Legal representative
Nerio Checchi
The illustration shows the locations and meanings of the
safety signs.
A
D
C) Information plate: strap up at the anchor points
D) Prohibition plate: forbidden to climb on the ma-
E) Information plate: this shows the greasing points.
6
shown to lift the work vehicle.
chine; keep a safe distance.
2
B
C
Use and maintenance