General Information - Checchi & Magli WOLF COMPACT Bedienungs- Und Wartungsanleitung

Aim of the manual
This instruction manual is produced by the manufactur-
er to provide all those who have dealings with the plant-
ing machine (which may also be referred to hereinafter
as the "work vehicle") with all the necessary information
and criteria to apply for its use.
Apart from adopting good use practices, operators (in
compliance with their job responsibilities) are also re-
quired to read and understand the information con-
tained in this use manual and put it into practice exactly
as stated.
The original instructions are supplied by the manufac-
turer in english language.
To fulfil legal or commercial requirements, the original
instructions may be supplied by the manufacturer in
other languages.
This manual is an integral part of the work vehicle; it
must be kept for future reference, in an easily accessible
place known to all those concerned, for the entire work-
ing life of the work vehicle.
If the work vehicle is sold on, the seller is required to pass
on the manual to the new owner.
Manufacturer and machine registration details
The plate shown, which is applied directly to the work vehicle, contains all the essential information for identifying
the machine and the manufacturer.
B
C
UN41 0001AF
Annexed documentation
As well as this handbook, the Customer is provided with the instructions for use and maintenance of any optional
units that may be fitted on the work vehicle.
Assistance request procedure
All requests for technical assistance must be made to the
manufacturer's Technical Assistance Service or the au-
thorised service centres.
English language

GENERAL INFORMATION

F
D E
To highlight certain parts of the manual's contents
deemed important for safety or information reasons the
following symbols have been used, whose meanings are
outlined below.
Danger - Warning
This indicates seriously hazardous situations which,
if ignored, could put the health and safety of those
involved at risk.
Caution
This shows that appropriate behaviour must be
adopted in order to prevent the health and safety of
those involved being at risk.
Information
This highlights vital technical information which
must not be overlooked.
A - Manufacturer's registration details
B - Machine type
C - Machine model
D - Gross machine weight
E - Serial number
F - Year of manufacture
Whenever making requests for technical assistance con-
cerning the work vehicle, remember to quote the data
shown on the data plate and the fault encountered.
1
1
Use and maintenance